 |
 |
 |
|
Advanced Water Level Sensor Cut-Off shuts power off to solar pump when storage tank is full.
Increases solar pump life!!
12 - 75 VDC
No additional parts required comes with 20' of water level sensor wire.
(light gauge wire 16-22 can be used to add more if needed)
Unit mounts to back of solar panels and plugs into panels and pump.
Leads go to storage tank and placed at the desired cut off level will shut the power off to the pump when water level reaches the ends of the wire.
Power will be resumed to pump when water level falls away. Has an 8 to 10 second delay so waves won't surge the pump. |
|
|
|
|
|
 |
|
 |
|
Features
- This is an electronic Advanced Water Level Cut-off Sensor.
- Input is DC 12-75 Volts.
- Advanced Level Cut-off (ALC) Sensor increases solar pump life!!
- ALC shuts power off to solar pump when storage tank is full.
- No additional parts required comes with 20' of water level sensor wire. (light gauge wire 16-22 can be used to add more if needed)
- Sensor unit mounts to back of solar panels and plugs into panels and pump.
- Leads go to storage tank and placed at the desired cut off level will shut the power off to the pump when water level reaches the ends of the wire.
- Power will be resumed to pump when water level falls away. Has an 8 to 10 second delay so waves won't surge the pump.
- The sensing is done electronically, simply mount in a weather protected area, (Under the solar panels or in an enclosure).
- Route the sensor leads to the storage tank, this can be done in or out of conduit, adjust the ends to the desired water level height.
- The ends can be plugged together to turn off the pump when desired. Sensor ends can be replaced if they have become corroded or damaged.
- (Advanced Level Cut-off Instructions--Click here.)
|
|
|
 |
|
 |
|
|
|
